Apollo Fish Graders
Developed in 1981, the Apollo grading machine is a top-quality product within the area of fish farming. One of the basic advantages of the Apollo grading machine is that it has proven its usefulness in the production, as it has been well-tried and tested thoroughly. The grader is made in AISI 316 acid-resisting stainless steel, which makes it prefect to use in working situations involving seawater.
The Apollo grading machine is a specially developed machine, which can sort living fish such as salmon, trout and eel. It sorts the fish in 3 or 4 different sizes by means of rollers, which are situated 2 by 2.
The rollers run against each other so that the fish are “lifted” up onto the rollers. When the gaps between the rollers are big enough, the fish will eventually slide down and end up in grading sizes below the rollers.The rollers are adjusted according to the size of the fish. Any adjustment of the width between the rollers is made with two finger screws and the width varies from 0 up to 36 mm.
One of the unique qualities that the APOLLO grading machine possesses is that it can be adjusted in both angle and height in order to match the working environment at hand.
If a greater slide-angle is wanted, it is possible to adjust the height of the machine trough the rear wheel. The wheel can be adjusted from 10 cm to 30 cm ( in 10 cm intervals ). Nosewheel unadjusted (low slide-angle) This kind of adjustment can be very useful if the activity level of the fish varies. During the summer when the weather is especially hot, the fish tend to be more active than usual. When the weather is cold, the opposite happens.
Apollo Eel grader
In its basic form, the eel grader resembles the trout grader. However, this grader is made specially for sorting smaller fish between 1-5 gram. It differs from the trout grader in that the tracks are equipped with so-called frictionless scrapers, which prevent the fish from getting stuck in the machine.
In other words, these scraping boards enable the machine to grade fish from the weight of only 1 gram and upwards. The special scraping boards are the green lines on the rollers.This plate must be removed when fish above 250 gram are graded. It is there to prevent small fish from falling back to the medium size.
Connection of flushing water
One criteria a good grader must fulfil is that it must be easy to connect flushing water to the machine, and our grading machine fully meets this demand.
The grader is equipped with pipes below the rollers and these pipes discharge the fish to the outlets. The grader has either 3 or 4 pipes, depending on how many sorts of fish there are. It is possible to have outlets in either the right or the left side of the grader, which is completely at the user’s choice.
When the user has decided in which direction he wants his outlets, he simply has to place the special endcaps on the side of the pipes where he has to connect a waterhose, which will flush out the fish. The outlet at the end (which is positioned according to grading direction) can be adjusted up or down in both sides, according to which side the user is grading.
Apollo Graders comes in following models :
- number of tracks : 4,5,7 or 10
- Number of outlets (sizes) : 3 or 4
- Grading-ranges : 1-650 or 5-750 grams
- Voltage : single-phase 230V or three-phase 400V
|Fish species||Eel||Trout, Salmon, Codfish, Smolt etc.|
|Model||4 tracks||4 tracks||5 tracks||7 tracks||10 tracks|
|Total width at rear wheels [cm]||108||108||128||166||222|
|Distance nose to rear wheel [cm]||270||270||270||270||270|
|Total length of machine [cm]||315||315||315||315||355|
|Width of machine at top [cm]||83||83||102||139,6||196|
|Height adjustment, rear end [cm]||10/20/30||10/20/30||10/20/30||10/20/30||10/20/30|
|Height adjustment, front end [cm]||25||25||25||25||25|
|Distance between rollers [mm]||0-36||0-36||0-36||0-36||0-36|
|Distance between topbars [mm]||38||38||38||38||38|
|Length of rollers [cm]||200||200||200||200||200|
|Curvature accuracy of rollers [mm]||<0,2||<0,2||<0,2||<0,2||<0,2|
|Motors, power [kW]||0,18||0,18||0,18||0,18||0,18|
|Motors, rpm [rpm]||900||900||900||900||900|
|Standard voltage [V]||230/400||230/400||230/400||230/400||230/400|
|Sprocket wheel, no. of teeth||z=32||z=19||z=19||z=19||z=19|
|Number of grading sizes||3 or 4||3 or 4||3 or 4||3 or 4||3 or 4|
|Capacity (with 300-400 gr.) [ton/h]||2-3||3-4||4-5||6-8|
|Size range [gr]||1-180||1-650||1-650 or 5-750||1-650 or 5-750||1-650 or 5-750|